elviranazirova32@gmail.com https://www.pinterest.ru/handmadiya/ https://feeds.feedburner.com/Free-tutorialnet

How To Sew A Travel Manicure Kit

How To Sew A Travel Manicure Kit

This travel manicure kit requires just a few scraps of fabric to make, and it is an easy sewing project perfect for experienced and beginning sewers alike. 

Small enough to tuck into a toiletry bag or purse, but just the right size to hold all of your basic nail-care essentials, this travel manicure kit is a handy item you’ll never know how you did without! Read on for the full tutorial.

How To Sew A Travel Manicure Kit

For this project, you will need…


    Travel Manicure Kit Pattern Pieces (click link for FREE download)

    Approximately 1/4 yard of 3 coordinating fabrics (I recommend home decor fabrics for this project for added durability)
    1 piece of fusible fleece measuring at least 7×10″
    1 piece of marine vinyl measuring at least 5.5×8″ 
    Washable ink marker
    Clear ruler
    Coordinating thread
    26″ section of 1″ grosgrain ribbon
    Point turning tool or wooden skewer
    Basic sewing supplies: machine, shears, iron, etc.
    Manicure essentials: nail polish, nail polish remover pads, nail clippers, nail file, etc.

To begin, print and cut out the pattern pieces. Note: Make sure when printing that Page Scaling is set to None. When printed, the small box at the top left of each page should measure exactly 1″.

Make Your Cuts


For each kit, use the pattern pieces to cut the following:

    1 outer main body piece and 1 inner main body piece from the coordinating fabrics
    1 main body piece from the fusible fleece
    1 back pocket piece cut on the fold from the coordinating fabrics 
    1 front pocket piece cut on the fold from the coordinating fabrics
    1 protective mat piece from the marine vinyl

Let’s Get Sewing!


Step 1: Iron the fusible fleece to the wrong side of the outer main body piece. Set piece aside.

Step 2: Fold the front pocket piece in half lengthwise with the wrong sides facing, making sure to align all outer edges and the rounded corners. Press. Edgestitch a scant 1/8″ from the edge across the top (folded) edge. With the piece laid flat on a work surface, use the clear ruler and washable ink marker to draw a line from the top to the bottom edge of the piece 3.5″ from the left edge. Draw another line in the same manner that is 2.75″ from the first line. Draw a third line that is 1.25″ from the second line. (Refer to the photo below.) 

Step 3: Fold the back pocket piece in half lengthwise, wrong sides facing; press. Edgestitch along the top (folded) edge as you did for the front pocket piece. Place the back pocket piece face up on a work surface. Place the front pocket piece on top of the back pocket piece so that the front of the front pocket is facing up. Align the rounded corners and raw outer edges of each piece. Pin into place.

Step 4: Stitch along the entire length of each of the vertical lines drawn in step 2 to secure the front and back pocket pieces together.

Step 5: Place the inner main body piece face up on a work surface. Pin the prepared pocket piece along the lower edge of the inner main body piece, aligning all outer raw edges and rounded corners, as shown. Baste the pocket to the inner main body by stitching 1/8″ around the edge of the pocket piece. (This will ensure the pocket stays in place in the next step.)

Step 6: Center the ribbon piece on top of the right side of the main body outer piece (the piece that is backed with the fusible fleece). Secure the ribbon to the outer main body piece by stitching a 1×2″ rectangle. Fold the ribbon toward the center of the piece and secure with a pin to ensure the ends of the ribbon don’t get stitched into the seam in the next steps.


Step 7: With the inner main body/pocket piece placed face up on a work surface, layer the outer main body/fleece piece on top, so that the right sides of each piece are facing and all outer edges and rounded corners are precisely aligned. Pin.

Step 8: Using a 1/4″ seam, stitch all the way around the pinned pieces, leaving a 2-3″ opening at the center of the top edge for turning. 

Step 9: Trim the stitched seam to 1/8″, leaving the opening untrimmed. 

Step 10: Carefully remove the pin holding the ribbon in place on the inside of the piece before turning the piece right side out through the opening. Use a point turning tool or wooden skewer to ensure the seam and corners are totally turned. 

Step 11: Press the piece flat, tucking the edges at the opening toward the inside of the piece. Pin the opening shut. Stitch 1/8″ around the outer perimeter of the piece, closing the opening as you stitch.

How To Sew A Travel Manicure Kit

Step 12: Tuck the vinyl surface protector pad into the back pocket, and then fill each of the front pockets with the polish, file, nail polish remover pads and nail clippers. To close, simply roll up the kit from on end to the other and secure with a pretty bow.

How To Sew A Travel Manicure Kit

Your travel manicure kit is complete!

Filled with nail-care essentials, this is the perfect way to stay polished and organized on the go. I love that the kit is compact enough for tucking into a purse or overnight bag, and the extra padding from the fleece lining keeps things protected during travel.

How To Sew A Travel Manicure Kit

How To Sew A Travel Manicure Kit

The handy protector pad will ensure surfaces stay clean during manicures. 

How To Sew A Travel Manicure Kit

How To Sew A Travel Manicure Kit

How To Sew A Travel Manicure Kit

When it’s time, the kit rolls up easily and closes stylishly with a pretty bow! Wouldn’t these make a fabulous gift for a special recipient? (It’s never too early to start thinking about stocking stuffers!)

How To Sew A Travel Manicure Kit

How To Sew A Travel Manicure Kit

0 comments:

Post a Comment