How about a little tutorial on how to make one for yourself? Yes? Alrighty then...here we go!
Gather your supplies:
1/2 yard Exterior Fabric (tan Kona cotton)
1/2 yard Lining (red gingham)
1/2 yard Accent for exterior strip and interior pocket (cupcakes)
1/2 yard Fusible Fleece
From the Exterior cut:
One Bag Bottom 7 1/2" x 26"
One Bag Top 6" x 26"
Two Handles 4" x 19"
From the Lining cut:
One Main Piece 14" x 26"
From the Accent cut:
Exterior Strip 3"x 26"
Pocket 7" x 9"
From the Fusible Fleece cut:
One Main Piece 15" x 26"
**Seam Allowance is 1/4" unless otherwise noted**
Let's get started, shall we?
1. Fold Pocket in half, so that it measures 4 1/2" x 7"; pin edges making sure to leave a 2" opening for turning and stitch.
2. Trim corners; turn right side out and press; topstitch 1/4" from folded edge.
(not the side with the opening)
3. Find the centers of the pocket and lining by folding in half and marking. Measure 2" down on lining, and pin pocket in place, matching centers; edge stitch 1/8". Fuse fleece to lining (not pictured) and set aside.
4. With right sides together, stitch exterior strip to bag bottom; press seam toward bag. Repeat for bag top to remaining side of accent strip.
5. With right side up, topstitch 1/4" from accent edge on both sides of exterior.
6. With right sides together, pin lining to exterior and stitch.
7. Turn lining to inside (wrong sides together) and press but do not stitch. You should have about 1" of the exterior fabric folded to the inside:
8. Open bag pieces out, pin long edge, right sides together, and stitch all the way down.
**ignore the pins at the top and bottom of bag, ONLY pin and sew the side at this stage**
9. Match center of seam to center of folded edge of bag; press seam open; pin top and bottom of bag and stitch leaving 3"-4" gap in the lining for turning.
10. Measure a 1 3/4" square on each corner, starting with the fold and the seam, NOT the raw edge (if you measure from the raw edge, your square will be off by 1/4" on one side)
11. Cut all four squares from the bag corners.
12. Match center of fold to center of seam and pin.
13. Sew across the seam, making sure to backstitch when you start and stop. Backstitching will reinforce the corners.
14. Carefully turn the bag right side out through the opening in the lining and press. Stitch opening closed by hand (not pictured); topstitch 1/2" from finished edge.
15. For the handles, fold each handle in half lengthwise and press.
16. Fold one raw edge to center and press.
17. Repeat for the other side.
18. Refold at the center and edgestitch 1/8" from double fold side first (this helps prevent twisting and bunching when stitching) and then edgestitch single fold side.
19. Measure and mark 2 1/2" from center back seam on each side; place center of the right side of handle edge about 1 1/2" down from finished edge on this mark. Measure 1/2" down from the handle's raw edge (or 2" from finished edge of bag) and fold handle up towards top of bag (this process makes sure that the rough edge of the handle is hidden). Pin in place and repeat for the other end. Repeat process for front of bag.
20. Stitch a square with an "X" in it at the handle's edge (not pictured). This will ensure the security of the handles.
0 comments:
Post a Comment