Sew a Super Cute Cathedral Window Pincushion! Easy DIY Pin Cushion. Free Sewing Tutorial.
First things first: When I saw the first photo of a pincushion like this, I assumed it would be quite elaborate and difficult to sew. I was wrong. While these cushions are indeed somewhat involved—certainly more so than simply sewing two pieces of fabric together (right sides facing) and stuffing them, which also makes for a wonderful pincushion—are they difficult to sew? No, definitely not. Essentially, it’s origami with fabric. If you can iron accurately, you’ve already won half the battle.
Please don’t be confused by the fact that the photos show different cushions; the lighting conditions weren’t ideal, so I simply chose the best photo for each step…
What do you need?
A piece of fabric measuring 27 x 27 cm—ideally a solid color or a very small-scale print (in this case, the white fabric).
A piece of fabric measuring 15 x 15 cm for the underside (the green fabric in the tutorial).
A small piece of fabric measuring 11.5 x 11.5 cm (the red fabric here). Again, a small-scale print works best; this fabric will end up being the most prominent one.
Small fabric scraps for the four outer sides and the button.
A coverable button (a "button kit" style) with a diameter of 19 mm or 23 mm.
Thread that matches the fabric used for the underside.
Stuffing (fiberfill).
Paper or cardboard for a template—I simply cut up an oversized A4 envelope I received in the mail.
And here’s how it’s done:
Cut out the large piece of fabric very precisely and iron it. Spray starch can be helpful if stubborn creases still need to be ironed out. Place the template in the center of the fabric.
and iron along the edge of all the long sides. It’s best to use plenty of steam; this won’t harm the template (other than leaving a few water spots).
After that, the corners are folded over and pressed.
and then fold the two corners of the long sides over. Secure again by ironing.
Repeat this process for all 4 corners, then remove the paper template.
Now, with the corners still folded in, fold the whole piece in half and press firmly with an iron.
Unfold it again, fold it in the other direction, and press it well once more.
Unfold it again. You will now see a cross shape. Next, fold each corner toward the center as accurately as possible and press the creases down firmly.
Then, fold all the corners toward the center once more and iron them.
Iron again with plenty of steam and carefully unfold
Now insert the 11.5 x 11.5 cm piece of fabric.
And only now, for the first time, do we turn to the sewing machine:
The center is now sewn shut—just a few stitches in both directions. Be sure to secure the thread well at both the beginning and the end of the seam.
Now it’s time to position the 4 outer fabrics. In my case, I used text-print fabrics. The main print from the “Noteworthy” collection is full of messages—or rather, a “to-do list” for life. I selected 4 of these phrases, cut them out, and placed them accordingly.
Now the corners are folded over, pinned in place, and then sewn down. I sew them one by one so that I don’t prick myself as often.
Of course, you could also pin everything in place beforehand and then sew it all on in one go—that’s entirely up to you. Personally, I don’t really get along with straight pins (or perhaps they don’t get along with me!), so I prefer an approach that uses as few pins as possible.
As for the presser foot: since it’s just a standard straight stitch, you can use a regular presser foot for everything. For the sake of simplicity, I’ve used an appliqué foot here.
Now for the back. The piece of fabric must be larger than the front section.
Afterwards, it is cut in half and sewn back together, leaving an opening for turning it right side out.
I always make the turning openings too small. I’m completely incapable of learning from this. If you want to make the turning process a bit easier, leave a little more space.
Now, place the front piece onto the under-fabric, with the right sides facing each other, and pin it securely in place.
Now, sew all the way around the edge. Be sure to secure your stitches well at the beginning and the end. I sewed quite close to the edge so that the messages remain easy to read, but a presser-foot-width seam allowance works perfectly fine here, too. Trim away the excess fabric from the back and turn the piece right side out.
Use a turning tool—or a blunt pencil—to carefully shape the corners.
Now it’s time to stuff the cushion. You can use polyester fiberfill—for example, from a brand like Freudenberg—or simply repurpose the filling from an IKEA cushion by cutting it open.
The latter is significantly cheaper and of comparable quality. I once read that using steel wool helps keep needles sharper, though I’m not sure if that’s actually true.
Fill the cushion well, making sure to reach the corners, and close the opening by hand using a ladder stitch.
Next, I sew the center of the top piece to the bottom piece. Use a thread that matches the bottom piece for this. Simply pass the needle from top to bottom a few times, then tie it off securely. It’s best to make the knot on the top side; a button will be placed over it, so the knot won’t be visible.
Next, I cover a button. If the fabric panels don’t quite meet perfectly in the center, a relatively large button (23 mm in diameter) helps to conceal this. Otherwise, a button with a diameter of 19 mm or smaller will suffice.
And the pincushion is finished! I think these cushions make a lovely gift for a friend or acquaintance who enjoys sewing.






































0 comments:
Post a Comment